Offer
LIQUID COOLING
 

                                                                    

Liquid Cooling


  D12 plus


D12 plus is an antifreeze and coolant with additives for engine based on Ethylene Glycol (1,2 Ethane Diol ), organic acids and is without silicate.

D12 plus is a ” long life coolant ” for engine with organic acids

D12 plus can be filled in cast iron and all-aluminium engine for life .

D12 plus offers necessary protection against corrosion , formation of scale and frost. It increases the boiling point .

D12 plus can be used all year around.

D12 plus is an OAT – product, that is mixable with NAP – free products ( such as VW G11, G12, G12 plus)


Composition and Color

- 1.2-Ethane Diol with inhibitors
- no permitted Nitrite
- no permitted Phosphates
- no permitted Silicates
- no permitted Amines
- no permitted Borax
- color : red

Mixability

Mixability with water in all diluted
Frost protection

frost protection up to - 25°C : you need 40 % coolant
frost protection up to - 37°C : you need 50 % coolant
frost protection up to - 52°C : you need 60 % coolant

 

D12 plus has received a Technical Approval from recognized car manufacturers:

VOLKSWAGEN, AUDI, SEAT, SKODA,

OPEL, GM, SAAB, FORD,

JAGUAR, LAND-ROVER,

MAN, CATERPILLAR, VAUXHAL, ZEPPELIN

 

D12 has received norm:

VW TL 774F

WSS-M97 B44D

MAN 324SNF

ASTM-D4985

GM B 040106


Packagings: 2L, 5L, 60L

  

D12 plus plus


D12 ++ is an antifreeze and coolant with additives for engine based on Ethylene Glycol (1,2 Ethane Diol ).

D12 ++ is a ” long life coolant ” for engine with organic acids

D12 ++ can be filled in cast iron and all-aluminium engine for life .

D12 ++ offers necessary protection against corrosion , formation of scale and frost. It increases the boiling point .

D12 ++ can be used all year around.

D12 ++ is an OAT – product, that is mixable with NAP – free products ( such as VW G11; VW G12; VW G12 plus, G12 plus plus)


Composition and Color

- 1.2-Ethane Diol with inhibitors
- no permitted Nitrite
- no permitted Phosphates
- no permitted Amines
- no permitted Borax
- with Silicates
- color : violet

 Mixability

Mixability with water in all diluted
Frost protection

frost protection up to - 25°C : you need 40 % coolant
frost protection up to - 37°C : you need 50 % coolant
frost protection up to - 52°C : you need 60 % coolant

 

D12 PLUS has received a technical approval of recognized technical car manufacturers:

Volkswagen, AUDI, SEAT, Skoda, VW TL 774 F

Packagings: 2L, 5L, 20L, 60L, 210L

 

Liquid "WS" to heating, climate, ventilation - and solar systems


 

Liquid WS is an heat-transfer and cooling media with additives based on 1,2 Propane diol.
 
Liquid WS  can mix with water. The best concentration is 30 to 50 %.
It can be use in heating -, climate -, ventilation - and solar systems. The optimal temperature lies between -35°C and 180°C. A temperature of more than 200°C can change the properties of the liquid.
 
Liquid WS offers necessary protection against corrosion, formation of scale and frost. It increases the boiling point. 
 
Liquid WS can be used all year around.
 
Liquid WS is not a hazardous material according to RID/ADR, GGVS/GGVE, ADNR, IMDG, ICAO-TI/IATA-DGR.
 
 
Composition and Colour
 
- 1.2-Propane diol with inhibitors
- no permitted Nitrite
- no permitted Phosphates
- no permitted Silicates
- no permitted Amines
- no permitted Borax
- color : red
 
 
Properties :
 
Density 20° C (g/cm3):               1,00 - 1,12                 DIN 51757
Refractive index    nD20:             1,426 - 1,439              DIN 53423
Boiling point          (°C):             > 155                         ASTM-D 1120
Flash point            (°C):            > 100                         ASTM-D 51758
pH-Value      (33Vol.%):             7,5 - 8,5                     ASTM- D 1287
Reserve alkalinity        :             > 5,5                          ASTM- D 1121
(ml 0,1n HCl )
 
 
Mixability
 
Mixability with water in all diluted
Mixability with hard water                          : no precipitate
Inhibitor stability according to ASTM-D 4340 : no precipitate
 
Frost protection
 
frost protection up to - 25°C : you need 40 % coolant
frost protection up to - 37°C : you need 50 % coolant
frost protection up to - 52°C : you need 60 % coolant
 
Corrosions protection ( according to ASTM-D 1384)
 
Weight loss of heavy metals     ( g/ m² ) :        < 4
Weight loss of aluminiumalloys   ( g/ m² ) :        < 2
 

 

 

 

  

   

 

    Drukowanie bieżącej strony
About us |Cooperation |Contact |Localization |
ABIS - ul.Warszawskiego 12, 63-400 Ostrów Wlkp., tel.+48 62 592 00 03, fax +48 62 591 33 33, e-mail: biuro@abis-ostrow.com.pl |  tel-wd.com created